KnKut 10 Piece Carbide Burr Set with 1/4" Shanks
10 Piece KnKut 1/4” Carbide Burr Set in custom wooden case.
KnKut Carbide Burrs (A.K.A. Rotary Files) are rotary cutting tools commonly used in removing burrs from castings.
-
Solid Carbide Head
-
Industry Standard Forms: SA, SB, SC, SE, SF, SG, SM, SL, SH, SK, SJ, SN, SNE
-
All KnKut Carbide Burrs are Double Cut
The double cut allows for rapid stock removal in harder materials. The addition of the left hand flutes reduces the pulling action, allowing better operator control. It reduces the size of the chips and can be used at slower than normal speeds.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
This KnKut 10 Piece Burr Set with 1/4 Inch Shanks features Double Cut Carbide Burrs which allows for rapid stock removal in harder materials. The addition of the left hand flutes reduces the pulling action, which allows for better operator control. It reduces the size of the chips, and it can be used at slower than normal speeds.
*For maximum control and to prevent whipping and chatter, make sure to insert the shank as far into the chuck as possible.
*Avoid excessive pressure which slows the spindle speed and damages the cutting edge. Do not operate the burr when dull. The high heat and pressure will cause excessive chipping and possible braze failure.
| Manufacturer | KnKut |
|---|---|
| Length | 4.50 |
| Width | 3.00 |
| Weight | 1.500000 |
| Country of Manufacture | United States |
